|
Per Item Discount
Buy multiple items & get a $1.50 per item discount for all items after the first. Your discount will be applied at checkout.
SPEAKER VOLUME CONTROL WHITE IMPEDANCE MATCHING STEREO BIC AMERICA SVC-2W
 |
|
| Click to enlarge image(s) |
Configure to maintain 8 ohms impedance for up to 8 pair speakersUse 1 control per pair of speakersPower rating: 100W per channelFreq resp: 20 Hz–20 kHz White
WEATHERPROOF OUTDOOR VOLUME CONTROL BOX
 |
|
| Click to enlarge image(s) |
Works with most stereo volume controlsPole or surface mountGray colorNot for slider style controls
|
|
SPEAKER VOLUME CONTROL IMPEDANCE MATCHING STEREO OEM
 |
 |
|
| Click to enlarge image(s) |
For full audio systemAdjust volume without leaving the roomRotary 12 position impedance matching auto former1x, 2x, 4x, 8x, & 16x impedance multiplierSmooth transition between volume stepsFreq response 20 Hz-20 Khz +/- 1Db2.625" mounting depthIncludes decorator wall platesLifetime limited warranty
SPEAKER VOLUME CONTROL IMPEDANCE MATCHING STEREO SLIDER PRO WIRE VX-100
 |
|
| Click to enlarge image(s) |
12-position smooth slide switch transition between volume stepsImpedance matching12-tap, high-grade 100W RMS autoformer Quick disconnect terminalsFreq resp: 20 Hz-20 kHz +/- 1 dBIncludes mounting bracket and decorator wall plateLimited lifetime warranty
SPEAKER VOLUME CONTROL WEATHERPROOF
 |
|
| Click to enlarge image(s) |
100W RMS per channelSpecial cover plate, knob and gasket permit outside use10 volume positions, including Off positionIncludes outdoor box with inlet for 3/4 inch conduitNot impedance matchingLimited lifetime warranty
Please social bookmark us
|
|
Order online
Or by phone
1-866-478-1033
In Wall Speaker Volume Control
**If you are using a PA style system with 25 or 70 volt lines these remarks do not apply. An in wall control serves a vital purpose, that of protecting your amplifier from damage. They do this by
providing impedance protection, allowing the use of multiple pairs of
speakers without exceeding the minimum allowable impedance of your
amplifier. Be careful with any control that is not impedance matching. If you have a non impedance matching volume control and wish to run multiple speakers you will need an impedance matching speaker selector. In most cases the impedance needed is set by jumpers, and instructions are included.For more about impedance matching see our short article.
|
|